Axel Oxygen 3 Specifications download pdf (Page 4)

SAFETY INSTRUCTIONS

Pag. 4

2 SAFETY INSTRUCTIONS

Read instructions: Retain these safety and operating instructions for future reference. Adhere to all

warnings printed here and on the console power unit. Follow the operating instructions printed in this

operating manual.

Do not remove covers: Operate the power unit with its covers correctly fitted. Refer any service work

to competent technical personnel only.

Power sources: Connect the power unit to a mains power only of the type described in this Operating

manual and marked on the rear panel. Use the AC cord provided with the console. If the provided plug does

not fit into your outlet consult your service agent for assistance.

Power cord routing: Route the power cord so that it is not likely to be walked on, stretched or pinched

by items placed upon or against it.

Grounding: Do not defeat the grounding and polarisation means of the power cord plug. Do not remove

or tamper with the ground connection in the power cord.

Water and moisture: To reduce the risk of fire or electric shock do not expose the power unit or console

to rain or moisture or use it in damp or wet conditions. Do not place containers of liquids on it which might

spill into any openings.

Ventilation: Do not obstruct the ventilation slots or position the console or power unit where the air flow

required for ventilation is impeded.

Environment: Protect from excessive dirt, dust, heat and vibration when operating and storing. Avoid

tobacco ash, smoke, drinks spillage, and exposure to rain and moisture. If the console becomes wet, switch

off and remove mains power immediately. Refer servicing to qualified technical personnel only.

Servicing: Switch off the equipment and unplug the power cord immediately if it is exposed to moisture,

spilled liquid, objects fallen into the openings, the power cord or plug become damaged, during lightening

storms, or if smoke, odour or noise is noticed. Refer servicing to qualified technical personnel only.

Installation: Install the console in accordance with the instructions printed in this Operating Manual. Do

not connect the output of power amplifiers directly to the console. Use connectors only for their intended

purpose.

Damage: To prevent damage to the controls and cosmetics avoid placing heavy objects on the control

surface, scratching the surface with sharp objects, or subjecting the console to rough handling and vibration.

Radiation: To avoid induced noise and interference pickup do not operate the console close to strong

sources of electromagnetic radiation such as power supplies, lighting cables and dimmers.

Cleaning: Avoid the use of chemicals, abrasives or solvents. The control panel is best cleaned with a soft

brush and dry lint-free cloth. Do not leave marking tape stuck to the console for long periods of time as the

adhesive can degrade and leave a sticky residue. The faders, switches and potentiometers are lubricated for

life. The use of electrical lubricants on these parts is not recommended.

Transporting: The console should be transported in the original packing. Protect the control surface from

damage during transit. The console is a large and heavy item. To avoid injury ensure adequate man power

and precaution when lifting or moving the console.

This manual images could differ a bit from Yr Oxygen 3 real design.

1 2 3 4 5 6 7 8 9 ... 18 19

No comments

Axel Oxygen 3 Specifications Page 4