Axel AX3000 65 User's Manual User Manual

AXEL Platine Terminal AX3000 Models 65 and 75 USER'S MANUAL March 2006 - Ref.: AX3E/0521-1

11.4.1 - The bootp Stage ...205 11.4.2 - The tftp Stage ...

Installing under UNIX/LINUX 88 AX3000 - User's Manual 5.4 - THE AXEL TTY SERVER 5.4.1 - Overview The TTY server emulates a multi i/o board co

Installing under UNIX/LINUX AX3000 - User's Manual 89 The following drawing shows the Unix/Linux mechanisms: SocketTCP StackAXELtty serverAX3

Installing under UNIX/LINUX 90 AX3000 - User's Manual 5.4.3 - Using an AXEL tty server a) Overview The AXEL tty server uses a configuration f

Installing under UNIX/LINUX AX3000 - User's Manual 91 b) Running the Axel Tty Server The command to start the AXEL tty server is: /etc/axttyd

Installing under UNIX/LINUX 92 AX3000 - User's Manual 5.4.5 - Uninstalling Remove the AXEL files and kill the AXEL tty server process (signal

Installing under UNIX/LINUX AX3000 - User's Manual 93 Use the following command to reset a resource: # rsh axname ax_sinit password ress Wher

Installing under UNIX/LINUX 94 AX3000 - User's Manual For more information about this command, refer to Chapter 10. 5.5.5 - Downloading Firmw

Installing under OS/400 AX3000 - User's Manual 95 CHAPTER 6 --- INSTALLING UNDER OS/400

Installing under OS/400 96 AX3000 - User's Manual This chapter covers AX3000 installation under OS/400. This chapter describes the operation

Installing under OS/400 AX3000 - User's Manual 97 "PC" or "AS400 (F24)" in the displayed box Press <Alt><Rest&g

a) AUX1 and AUX2 Ports...232 b) Parallel Port ...

Installing under OS/400 98 AX3000 - User's Manual - Terminal Name (DEVNAME): if this name is left blank, the OS/400 will associate a dynamic

Installing under OS/400 AX3000 - User's Manual 99 a) 5250 Emulation General Parameters Within the 'Session Profile' box, select &ap

Installing under OS/400 100 AX3000 - User's Manual - Euro Coding: Euro symbol support. The three possible values are: - no: no specific proce

Installing under OS/400 AX3000 - User's Manual 101 b) Remapping 5250 Functions to PC Keyboards Most 5250 functions can be accessed through a

Installing under OS/400 102 AX3000 - User's Manual - <Alt Gr><F2> -> default port: setting a character string. When the defau

Installing under OS/400 AX3000 - User's Manual 103 6.1.5 - Connection Properties Within the 'Session Profile' box, select 'Con

Installing under OS/400 104 AX3000 - User's Manual The 5250 status line is displayed at the bottom of the screen and gives the following info

Installing under OS/400 AX3000 - User's Manual 105 6.2.2 - Using the Keyboard Two types of keyboard can be used with the AX3000: a PC/AT (102

Installing under OS/400 106 AX3000 - User's Manual 5250 Functions: 5250 Functions 5250 Keyboard PC/AT Keyboard Attention <Attn> <

Installing under OS/400 AX3000 - User's Manual 107 Axel Functions: Axel Function 5250 Keyboard PC/AT Keyboard AX3000 Shutdown <Rest&g

Installing under OS/400 108 AX3000 - User's Manual Example: 1 - Press <Alt Gr><F4> to set the Record mode. The 5250 status line

Installing under OS/400 AX3000 - User's Manual 109 6.2.4 - The Mouse Note: the mouse must be enabled. See Chapter 6.1.3. Four mouse actions a

Installing under OS/400 110 AX3000 - User's Manual The transparent mode can be used with: - a screen session (see Chapter 6.1.3): data is o

Installing under OS/400 AX3000 - User's Manual 111 Example: Esc AB <RC> is \1BAB\0D - Hexadecimal Mode: the dataflow contains only h

Installing under OS/400 112 AX3000 - User's Manual These printers can be controlled by one of two protocols: - Prt5250: this service (RFC 287

Installing under OS/400 AX3000 - User's Manual 113 These parameters are: - Host: the hostname to which the AX3000 opens a printer connection

Installing under OS/400 114 AX3000 - User's Manual b) Advanced Settings Within the Prt5250 box select "Enhanced Parameters" and pre

Installing under OS/400 AX3000 - User's Manual 115 A printer handled through the Prt5250 service is seen as a standard spooled OS/400 printer

Installing under OS/400 116 AX3000 - User's Manual - 8928 (Change of device failed): during the printer modification operation (reconnection

Installing under OS/400 AX3000 - User's Manual 117 6.4 - REMOTE ADMINISTRATION ☺: a Windows administration utility (AxRM or Axel Remote Manag

Introduction AX3000 - User's Manual 1 INTRODUCTION

Installing under OS/400 118 AX3000 - User's Manual - RESS : resource name (ex: SESS1). 6.4.3 - Editing the AX3000 Settings a) Under Windows

Installing under OS/400 AX3000 - User's Manual 119 6.4.4 - Setting-Up the AX3000 No OS/400 command allows the contents of a set-up file to be

Installing under OS/400 120 AX3000 - User's Manual Where: - AX_GETSTAT : command for getting statistics, - 192.168.1.241 : AX3000 IP addres

Installing under OS/400 AX3000 - User's Manual 121 This modification will take effect after restarting the telnet server: ===> ENDTCPSVR S

Installing under OS/390 AX3000 - User's Manual 123 CHAPTER 7 --- INSTALLING UNDER OS/390

Installing under OS/390 124 AX3000 - User's Manual This chapter covers AX3000 installation under OS/390 zSeries. This chapter is dedicated to

Installing under OS/390 AX3000 - User's Manual 125 7.1.1 - Setting a Session To set a profile session, enter the AX3000 Set-Up and select the

Installing under OS/390 126 AX3000 - User's Manual Within the 'Session Profile' box, select 'General Parameters' and pres

Installing under OS/390 AX3000 - User's Manual 127 - Uppercase: each key send the upper character if it is present. Otherwise, this is the lo

Introduction 2 AX3000 - User's Manual This manual provides details on terminal operation, maintenance and set-up. The manual is organized i

Installing under OS/390 128 AX3000 - User's Manual - Session Label: this character string (10 characters max.) is used to identify the sessio

Installing under OS/390 AX3000 - User's Manual 129 X () Keyboard is disabled X Only <Enter> is disabled X > Error: too much data

Installing under OS/390 130 AX3000 - User's Manual The following table lists the other useful keys: 3270 Functions PC/AT keyboard Fast curso

Installing under OS/390 AX3000 - User's Manual 131 The recorded data is stored in non-volatile memory so is not affected by switching off. R

Installing under OS/390 132 AX3000 - User's Manual b) Processing a key sequence To execute a series of keystrokes that have been recorded: -

Installing under OS/390 AX3000 - User's Manual 133 To set the Prt3270 service, enter the AX3000 Set-Up and select [Configuration]-[Aux. Ports

Installing under OS/390 134 AX3000 - User's Manual 7.4 - REMOTE ADMINISTRATION The remote administration command is rsh (or rexec). This comm

Installing under Windows AX3000 - User's Manual 135 CHAPTER 8 --- INSTALLING UNDER WINDOWS

Installing under Windows 136 AX3000 - User's Manual This chapter covers AX3000 installation under Windows This chapter describes the operatio

Installing under Windows AX3000 - User's Manual 137 8.1.1 - Setting-Up an RDP Session To set the RDP session, enter the AX3000 Set-Up and sel

Introduction AX3000 - User's Manual 3 Chapter 8: Installing under Windows Description of Windows specific features. Chapter 9: Tools and Stat

Installing under Windows 138 AX3000 - User's Manual - Resolution: Press <Space> to change the resolution. The resolutions available and

Installing under Windows AX3000 - User's Manual 139 These parameters are: - Encryption: three values of encryption are available. (For more

Installing under Windows 140 AX3000 - User's Manual 8.1.3 - Automatic Logon and Auto-Run Within the 'Session Profile' box, select &

Installing under Windows AX3000 - User's Manual 141 to the Windows spooler as the default printer for the terminal. Within the 'Session

Installing under Windows 142 AX3000 - User's Manual 8.1.5 - Auxiliary Port Redirection This method creates up to two COM ports at the client/

Installing under Windows AX3000 - User's Manual 143 8.1.6 - Bandwidth Within the 'Session Profile' box, select 'Bandwidth&apos

Installing under Windows 144 AX3000 - User's Manual Note: the background feature must be also allowed by the Windows server. See Chapter 8.1.

Installing under Windows AX3000 - User's Manual 145 8.2 - ICA SCREEN SESSION 8.2.1 - Setting-Up an ICA Session To set the ICA session, enter

Installing under Windows 146 AX3000 - User's Manual - Resolution: Press <Space> to change the resolution. The resolutions available and

Installing under Windows AX3000 - User's Manual 147 Note: the destination (ICA server or published application) may be left blank. In this ca

Installing under Windows 148 AX3000 - User's Manual - Use Alternate Address: set it to 'Yes' when a firewall is present. - Trace M

Installing under Windows AX3000 - User's Manual 149 8.2.3 - ICA Additional Parameters Within the 'Session Profile' box, select &apo

Installing under Windows 150 AX3000 - User's Manual 8.2.4 - Automatic Logon and Auto-Run Within the 'Session Profile' box, select &

Installing under Windows AX3000 - User's Manual 151 the Windows spooler as the default printer for the terminal. Within the 'Session Pro

Installing under Windows 152 AX3000 - User's Manual Within the 'Session Profile' box, select 'Aux. Port Redirection' and

Installing under Windows AX3000 - User's Manual 153 For more details see Windows help on Netlogon. 8.2.7 - Bandwidth Within the 'Session

Installing under Windows 154 AX3000 - User's Manual These parameters are: - Auto-Connection: if this parameter is set to 'yes', th

Installing under Windows AX3000 - User's Manual 155 - The number of published applications (sessions) can be set to between 1 and 5. - The pu

Installing under Windows 156 AX3000 - User's Manual Example 3: Citrix Desktop, VNC and ANSI sessions CITRIX Desktop VNC ANSI Reserved Reser

Installing under Windows AX3000 - User's Manual 157 - Resolution: use the spacebar to set preferred resolution and frequency from the list di

A Look at the AX3000 AX3000 - User's Manual 5 CHAPTER 1 --- INTRODUCTION TO THE AX3000

Installing under Windows 158 AX3000 - User's Manual - Additional Parameters: press spacebar to show dialogue box to set further settings. Se

Installing under Windows AX3000 - User's Manual 159 icons...) is sent to the terminal. The desktop is created locally using this information.

Installing under Windows 160 AX3000 - User's Manual - The ‘Refresh’ icon (top right corner) refreshes the desktop - The ‘Folder’ icon is a s

Installing under Windows AX3000 - User's Manual 161 When this utility is run the dialog box below is displayed: Select 'Connections&apo

Installing under Windows 162 AX3000 - User's Manual - client compatible (or medium): data flowing in both directions (from the client to the

Installing under Windows AX3000 - User's Manual 163 To modify the encryption level, within the 'RDP-Tcp Properties' box, click on t

Installing under Windows 164 AX3000 - User's Manual The Axel terminal supports up to basic level. To modify the encryption level, within the

Installing under Windows AX3000 - User's Manual 165 To allow automatic logon, within the 'RDP-Tcp (or ICA-Tcp) Properties' box, cli

Installing under Windows 166 AX3000 - User's Manual offered. This shuts down the idle sessions after a certain time. The idle session disconn

Installing under Windows AX3000 - User's Manual 167 session on which no action has been perform for a certain time (for example over lunch ti

A Look at the AX3000 6 AX3000 - User's Manual This chapter introduces the main features of the AXEL TCP/IP terminal. 1.1 - TERMINAL MODELS T

Installing under Windows 168 AX3000 - User's Manual 8.4.5 - Allowing Blank Passwords with Windows 2003 By default, with a Windows 2003 server

Installing under Windows AX3000 - User's Manual 169 By default, with a Windows 2003 server, the time zone redirection is disabled. To enabled

Installing under Windows 170 AX3000 - User's Manual On the left panel, select the session to be killed, then right-click. Within the displaye

Installing under Windows AX3000 - User's Manual 171 8.5.3 - Closing a Windows Session When a session is closed, the AX3000 either reconnects

Installing under Windows 172 AX3000 - User's Manual If the operating system doesn't provide an automatic procedure to allow sessions to

Installing under Windows AX3000 - User's Manual 173 AX3000 to be accessed as network printers. (i.e. these printers are controlled through th

Installing under Windows 174 AX3000 - User's Manual 8.6.1 - Setting-Up the AX3000 To set the LPD service on the terminal port, select the [Co

Installing under Windows AX3000 - User's Manual 175 Finally within the next dialog box, enter the two parameters requested: - name or address

Installing under Windows 176 AX3000 - User's Manual Example of 'Toolbar': the tool-bar displayed along the top of the screen Examp

Installing under Windows AX3000 - User's Manual 177 - downloading firmware, - entering the interactive set-up via a telnet client. It is also

A Look at the AX3000 AX3000 - User's Manual 7 1.2.2 - Terminal Function Each TCP/IP AXEL terminal can support up to six concurrent and indepe

Tools and Statistics AX3000 - User's Manual 179 CHAPTER 9 --- TOOLS AND STATISTICS

Tools and Statistics 180 AX3000 - User's Manual This chapter describes the embedded AX3000 tools. The AX3000 provides the following features:

Tools and Statistics AX3000 - User's Manual 181 Select the [Diagnostics]-[Connection state] dialog to check the status of all defined connect

Tools and Statistics 182 AX3000 - User's Manual For each auxiliary port, the following information is displayed: - Port: the name of the port

Tools and Statistics AX3000 - User's Manual 183 9.3.1 - Ethernet Statistics The following information is displayed: "Output" and

Tools and Statistics 184 AX3000 - User's Manual 9.3.2 - Interface Statistics The following information is displayed: In the above dialog box

Tools and Statistics AX3000 - User's Manual 185 - Status: the possible update values are: - None: no update (not requested) - Done: update su

Tools and Statistics 186 AX3000 - User's Manual Description of the information given within this box: - Who: AX3000 resource involved in the

Remote Set-Up AX3000 - User's Manual 187 CHAPTER 10 --- REMOTE SET-UP

The reproduction of this material, in part or whole, is strictly prohibited. For additional information, please contact: 14 Avenue du Québec Bât.

Remote Set-Up 188 AX3000 - User's Manual This chapter covers remote set-up of the TCP/IP AX3000. 10.1 - TELNET INTERACTIVE SET-UP The AX3000

Remote Set-Up AX3000 - User's Manual 189 The possible connection errors are: - The interactive set-up is already in use on the target terminal

Remote Set-Up 190 AX3000 - User's Manual Notes: - The next chapter explains how to create the configuration file conf_file, either using a t

Remote Set-Up AX3000 - User's Manual 191 When the set-up parameters have been loaded, the message 'OK, set-up sent' is displayed on

Remote Set-Up 192 AX3000 - User's Manual ERR 103: trailer label not found. Default factory set-up reloaded Command: setup_send Cause: the t

Remote Set-Up AX3000 - User's Manual 193 ERR 113: password required Command: setup_send, ax_reboot and ax_download Cause: the AX3000 Interac

Remote Set-Up 194 AX3000 - User's Manual ERR 203: xxx: no place to store udk value. Command: setup_send Cause: not enough memory to store t

Remote Set-Up AX3000 - User's Manual 195 Solution: check the number of sessions and pages. ERR 214: Associate host not found. Association re

Remote Set-Up 196 AX3000 - User's Manual ERR 220: Too many RDP sessions with BitMap cache active. Command: setup_send Cause: the two RDP se

Downloading Firmware AX3000 - User's Manual 197 CHAPTER 11 --- DOWNLOADING FIRMWARE

Initial Power-On AX3000 - User's Manual 9 CHAPTER 2 --- INITIAL POWER-ON

Downloading Firmware 198 AX3000 - User's Manual This chapter explains how to upgrade TCP/IP AX3000 firmware over a network. Firmware can be

Downloading Firmware AX3000 - User's Manual 199 11.1.2 - Under Unix These two protocols are included but not normally enabled by default. To e

Downloading Firmware 200 AX3000 - User's Manual A file ‘tftp’ should be present in /etc/xinetd.d. This file contains the tftp server setting

Downloading Firmware AX3000 - User's Manual 201 6 - Change the default TFTP directory: ===> CHGTFTPA ALTSRCDIR('/axfirm') 7 - Sto

Downloading Firmware 202 AX3000 - User's Manual Example for Unix/Linux: # rsh ax3001 ax_download password /usr/firm 192.168.1.249 Note abou

Downloading Firmware AX3000 - User's Manual 203 Enter the following parameters: - Protocol: select tftp, - Filename: path and name of the firm

Downloading Firmware 204 AX3000 - User's Manual The main capabilities of the bootpd configuration file are as follows: - tc: network descri

Downloading Firmware AX3000 - User's Manual 205 Note about password: specify the password if the set-up is password-protected. The message &ap

Downloading Firmware 206 AX3000 - User's Manual AX BOOTP V1.1a Flash Key 3 Next, an automatic connection to the tftp host will then be made

Downloading Firmware AX3000 - User's Manual 207 11.5 - IN EVENT OF DIFFICULTIES This section describes possible problems. The error list is no

Initial Power-On 10 AX3000 - User's Manual This chapter describes the 'Quick Set-Up' feature and the 'Auto-Configuration'

Downloading Firmware 208 AX3000 - User's Manual 5: Unknown transaction Identifier 6: File already exists 7: Illegal TFTP operation 0: User-d

Appendix AX3000 - User's Manual 209 APPENDIX

Appendix 210 AX3000 - User's Manual The following appendices give information about: A.1 - Using the AX3000 interactive set-up A.2 - Network

Appendix AX3000 - User's Manual 211 The mouse cannot be used within the telnet session. A help line is located in the bottom of the screen. Th

Appendix 212 AX3000 - User's Manual c) Dialog Boxes Move through dialog boxes with vertical arrow keys. Two type of fields are distinguished

Appendix AX3000 - User's Manual 213 To enter characters with an ASCII code lower than 20 hexadecimal, use a backslash ('\') before t

Appendix 214 AX3000 - User's Manual Select the '?' command in the horizontal menu of the AX3000 set-up to see the AX3000 Ethernet a

Appendix AX3000 - User's Manual 215 Two types of router can be used to access remote networks: - a default router: this router knows how to re

Appendix 216 AX3000 - User's Manual Example 1: router 1 is used to reach the 192.168.2.xxx network and router 2 is used to reach the 192.1.1.

Appendix AX3000 - User's Manual 217 Example 2: router 1 is used to reach both networks (192.168.2.xxx and 192.1.1.xxx): AX3000Router 1192.168.

Initial Power-On AX3000 - User's Manual 11 Example of the quick set-up menu: Quick set-up parameters: - Keyboard: keyboard nationality. The v

Appendix 218 AX3000 - User's Manual addresses and other network parameters to terminals and PCs when they are powered on. This can greatly si

Appendix AX3000 - User's Manual 219 A.3.3 - Using the AX3000 If the DHCP protocol is enabled the AX3000 automatically requests an IP address o

Appendix 220 AX3000 - User's Manual - <F11>: rebooting the AX3000 to run the DHCP search again. - <Ctrl><Alt><Esc>: e

Appendix AX3000 - User's Manual 221 A.4 - THE DNS PROTOCOL The DNS protocol (Domain Name System) allows names to be 'resolved' by th

Appendix 222 AX3000 - User's Manual has been obtained by a previous resolution. A.4.2 - Resolving a Name a) Resolution Strategy To resolve

Appendix AX3000 - User's Manual 223 Example of name resolutions: looking at the host table in Chapter 3.1.3 the name resolution attempts are:

Appendix 224 AX3000 - User's Manual The resolution operation depends on the number of DNS servers. These are the steps for a one-server resol

Appendix AX3000 - User's Manual 225 This is a screen-shot example when the resolution successes: Connecting to as400.servers.axel.com:23 (Teln

Appendix 226 AX3000 - User's Manual a) By the DHCP Server Important: the DHCP server must support the DDNS (Dynamic DNS) function. To regist

Appendix AX3000 - User's Manual 227 - Continue the update: the entries ("Host", "Text" and "Pointer") are overwr

Initial Power-On 12 AX3000 - User's Manual - Host IP address: if this field is left blank, DNS will be used to resolve the hostname. - Enable

Appendix 228 AX3000 - User's Manual Several formats are available for set-up parameter values: List: the possible values are listed (the cha

Appendix AX3000 - User's Manual 229 Header BEGIN_AX_SETUP V1.1 ######################################################### # TCP/IP A

Appendix 230 AX3000 - User's Manual - <$(X,Y)> is an "ethernet_axname" sub-string (start X, length Y). Notes: - If X is gre

Appendix AX3000 - User's Manual 231 TCP/IP Parameters ethernet_dns_servIP1 (address IP format) ethernet_dns_servIP2 (address IP format) et

Appendix 232 AX3000 - User's Manual Note: if a configuration file is obtained from an AX3000, undefined hosts and routers are commented out.

Appendix AX3000 - User's Manual 233 aux%_associate_envelope=*NONE (character string, 10 char max.) aux%_associate_ascii899=no (yes | no) aux

Appendix 234 AX3000 - User's Manual parallel_associate_devname= (character string, 10 char max.) parallel_associate_msgqname= (character st

Appendix AX3000 - User's Manual 235 usb%_preprint_string= (character string, 48 char max.) usb%_postprint_string= (character string, 48 char

Appendix 236 AX3000 - User's Manual net%_service_tcpport=2050 (number) net%_rtty_accept=no (yes | no) net%_filter_nl=no (yes | no) net%_pre

Appendix AX3000 - User's Manual 237 e) Service Table Note: Depending on the associated service, some parameters can be inactive. They are unma

Initial Power-On AX3000 - User's Manual 13 The stages are: - checking the network (link) - DHCP request sent to obtain an IP address (and ot

Appendix 238 AX3000 - User's Manual multi_intro=alt (alt | shift | ctrl | alt-shift ctrl-shift | ctrl-alt ctrl-alt-shift) multi_s1=112

Appendix AX3000 - User's Manual 239 Note: when a configuration file is obtained from an AX3000: - the value of "term_operating_mode"

Appendix 240 AX3000 - User's Manual s%_tcp_window=1024 (number) s%_tcp_mss=512 (number) s%_tcp_ttl=64 (number) s%_tcp_setport=random (ramdom

Appendix AX3000 - User's Manual 241 s%_fctn_typeahead=yes (yes | no) s%_mouse_enable=yes (yes | no) s%_remote_cad=yes (yes | no) s%_ScrlLoc

Appendix 242 AX3000 - User's Manual s%_rdp_prntimer=15 (number) s%_rdp_prndef (yes | no) s%_rdp_cachebitmap=yes (yes | no) s%_rdp_compressi

Appendix AX3000 - User's Manual 243 s%_ica_geometry=1024x768 (800x600-60Hz | 800x600-72Hz | 800x600-75Hz | 800x600-85Hz | 1024x768-60hz

Appendix 244 AX3000 - User's Manual s%_black= (number from de 0 to 63) s%_grey= (number from de 0 to 63) s%_white= (number from de 0 to 63

Appendix AX3000 - User's Manual 245 s%_udk_f35= (character string, 32 char max.) s%_udk_f36= (character string, 32 char max.) s%_udk_f37= (

Appendix 246 AX3000 - User's Manual Field-Exit | New-Line) s%_idk_dot=, (, | .) s%_idk_backspace=Standard (Standard | backspace) s%_idk_

Appendix AX3000 - User's Manual 247 For example, Axel’s auto-configuration feature (see chapter 2.1) requires the terminal to know the network

Initial Power-On 14 AX3000 - User's Manual a) Determination of the TCP port If DHCP sends a port number this is the TCP port used. If no va

Appendix 248 AX3000 - User's Manual A.6.2 - Adding an Axel option with the Microsoft DHCP Server To add a Axel DHCP option with Microsoft’s D

Appendix AX3000 - User's Manual 249 Click ‘OK’ to exit this box and 'OK' again to exit the former box. 3 - In the left panel select

Appendix 250 AX3000 - User's Manual The parameters are: - The IP address or DNS name of the AxRM server - The TCP port AxRM is listening on H

Appendix AX3000 - User's Manual 251 table): # arp -s a.b.c.d xx:xx:xx:xx:xx:xx Run a ping command: $ ping a.b.c.d The first ping requests ar

Appendix 252 AX3000 - User's Manual The following table lists the available AX3000 administration commands: Command Description ax_reboot Re

Appendix AX3000 - User's Manual 253 A.9.2 - General Level: Advanced Parameters This chapter describes special AX3000 operating parameters. Usu

Appendix 254 AX3000 - User's Manual b) The 'Link' Parameter The AX3000 10/100 network port is set by default as auto-sense. But it

Appendix AX3000 - User's Manual 255 f) The 'Supplemental Signals to Handle' Parameter The AX3000 checks the printer status by readin

Appendix 256 AX3000 - User's Manual 4.6. Note: when this parameter is set to 'yes', the "consultation mode" and the "

Appendix AX3000 - User's Manual 257 b) The 'TCP port' Parameter This parameter is the server TCP port on which the session is connec

Initial Power-On AX3000 - User's Manual 15 2.2.4 - Stage 4: Receiving the firmware download A dialog box on the terminal screen provides the

Appendix 258 AX3000 - User's Manual (power cut for example), at the next boot time, the connections are immediately accepted by the server. (

Appendix AX3000 - User's Manual 259 h) The 'Telnet Break Code' Parameter For the telnet session, the <Ctrl><Alt><Paus

Appendix 260 AX3000 - User's Manual There are currently five different generations of hardware in the field: - FK3: former production hardwar

Appendix AX3000 - User's Manual 261 - EE: Estonia - FI: Finland - FR: France - GR: Greece - IS: Iceland - PL: Poland - PT: Portugal

PERSONAL NOTES

14 Avenue du Québec Bât. K2 EVOLIC - BP 728 91962 Courtabœuf cedex - FRANCE Tel.: 33 1.69.28.27.27 - Fax: 33 1.69

Initial Power-On 16 AX3000 - User's Manual configuration file is received the terminal reboots: AUTO-CONFIGURATION Netwo

Interactive Set-Up AX3000 - User's Manual 17 CHAPTER 3 --- INTERACTIVE SET-UP

TABLE OF CONTENT INTRODUCTION ...1 1 - INTRODUCTION TO T

Interactive Set-Up 18 AX3000 - User's Manual This chapter describes AX3000 installation using the interactive set-up procedure. The following

Interactive Set-Up AX3000 - User's Manual 19 3.1.1 - AX3000 Interface To set the AX3000 interface select the [Configuration]-[TCP/IP]-[Interfa

Interactive Set-Up 20 AX3000 - User's Manual When <Space> is pressed on "Enhanced Parameters" a dialog box as shown below is

Interactive Set-Up AX3000 - User's Manual 21 Domain" (supplied by the DHCP server) will be used. If "Default DNS Domain" is emp

Interactive Set-Up 22 AX3000 - User's Manual Chapter 3.1.1) the 'Default Domain' parameter is automatically set and cannot be acces

Interactive Set-Up AX3000 - User's Manual 23 Chapter 3.1.2): - No DNS: a host is identified by both an alphanumeric character string beginnin

Interactive Set-Up 24 AX3000 - User's Manual To configure the router table, select the [Configuration]-[TCP/IP]-Routers] menu. A dialog box a

Interactive Set-Up AX3000 - User's Manual 25 3.2 - SETTING SCREEN, KEYBOARD AND DEFAULT PORT Select the [Configuration]-Terminal]-[General] me

Interactive Set-Up 26 AX3000 - User's Manual - Energy Star Power Saver (available only if the screen saver feature is set): to save or not mo

Interactive Set-Up AX3000 - User's Manual 27 3.2.2 - The Keyboard Keyboard parameters (PS/2 or USB): - Nationality: select the nationality fro

3.3.1 - "Text Emulations" Session Type ...29 3.3.2 - "IBM5250" Session Type...

Interactive Set-Up 28 AX3000 - User's Manual through escape sequences (for text-mode emulations). Printer parameters: - Default port: press &

Interactive Set-Up AX3000 - User's Manual 29 Note: the [RESET] button allows the default value for each setting to be reset. The available se

Interactive Set-Up 30 AX3000 - User's Manual 3.3.2 - "IBM5250" Session Type Text mode session for connections to AS/400. For more

Interactive Set-Up AX3000 - User's Manual 31 - full-speed (12 Mbits): printers - Maximal consumption: 500 mA (for both USB ports) Important No

Interactive Set-Up 32 AX3000 - User's Manual barcode reader is treated as a keyboard. See previous chapter. 3.4.4 - Connecting a Mouse A USB

Interactive Set-Up AX3000 - User's Manual 33 Logical Port'). b) Setting-Up The USB printer set-up procedure is the same as a serial or p

Interactive Set-Up 34 AX3000 - User's Manual 3.5 - SETTING AUXILIARY PORTS AND LOGICAL PORTS Three types of ports are provided for connecting

Interactive Set-Up AX3000 - User's Manual 35 a) Setting the AUX1 and AUX2 Serial Ports Select the [Configuration]-[Ports]-[Auxiliary Ports]-[A

Interactive Set-Up 36 AX3000 - User's Manual - Speed: selected from a list (from 300 to 115,200 bits per second). - Format: data format is se

Interactive Set-Up AX3000 - User's Manual 37 c) Setting USB Logical Ports Select the [Configuration]-[Ports]-[USB Logical Ports]-[UsbX] dialog

4.2.1 - Opening Sessions ...51 4.2.2 - Switching Sessions ...

Interactive Set-Up 38 AX3000 - User's Manual - Service: see Chapter 3.5.2 and below. - Parameters: see Chapter 3.5.2 and below 3.5.2 - Connec

Interactive Set-Up AX3000 - User's Manual 39 - NL=CR+NL Filter: The line feed character 0x0A can be mapped to carriage return + line feed 0x0D

Interactive Set-Up 40 AX3000 - User's Manual - Auto-Connection: if this parameter is set to 'yes', the connection will be automatic

Interactive Set-Up AX3000 - User's Manual 41 Note: Axel provides a Unix/Linux utility called axtty by which pseudo-terminals may be associated

Interactive Set-Up 42 AX3000 - User's Manual performed. After the calibration is done touch screen events are automatically remapped to the f

Interactive Set-Up AX3000 - User's Manual 43 - Pre-print String: character string sent before the printing. - Post-print String: character str

Interactive Set-Up 44 AX3000 - User's Manual Select the [Configuration]-[Terminal]-[Multi-session] dialog box: 3.6.1 - Maximum Number of Ses

Interactive Set-Up AX3000 - User's Manual 45 3.6.2 - Multi-Session Keystroke The keystrokes to move from one session to another can be configu

Interactive Set-Up 46 AX3000 - User's Manual 3.7 - PASSWORD Access to the set-up procedure can be controlled by a password. 3.7.1 - Using the

Interactive Set-Up AX3000 - User's Manual 47 Three operations are permitted: - enter the password to access the set-up - press <Esc> or

a) VNC Terminals with Login ...80 b) VNC Terminal without Login ...

Using the AX3000 AX3000 - User's Manual 49 CHAPTER 4 --- USING THE AX3000

Using the AX3000 50 AX3000 - User's Manual This chapter covers use of the AX3000. 4.1 - TURNING ON THE AX3000 When the AX3000 is turned-on, s

Using the AX3000 AX3000 - User's Manual 51 4.2 - USING MULTIPLE SESSIONS AXEL TCP/IP terminals provide multiple and concurrent connections. T

Using the AX3000 52 AX3000 - User's Manual 4.2.3 - Disconnecting Sessions A session can be disconnected by one of two ways: - a system comman

Using the AX3000 AX3000 - User's Manual 53 - automatically: when the terminal is idle (keyboard or screen) for a certain time, the AX300 blac

Using the AX3000 54 AX3000 - User's Manual Notes: - this hot-key function is only available from a character-based session and if the "

Using the AX3000 AX3000 - User's Manual 55 AX3000 may be turned off.

Using the AX3000 56 AX3000 - User's Manual 4.6 - AX3000 HOT-KEYS The AX3000 hot-keys are listed in the following table. (These hot-keys are l

Installing under UNIX/LINUX AX3000 - User's Manual 57 CHAPTER 5 --- INSTALLING UNDER UNIX/LINUX

b) Processing a key sequence...108 6.2.4 - The Mouse...

Installing under UNIX/LINUX 58 AX3000 - User's Manual This chapter covers AX3000 installation under Unix/Linux. 5.1 - TEXT MODE SESSION (TCP/

Installing under UNIX/LINUX AX3000 - User's Manual 59 - Connection Properties: pressing <Space> displays a dialog box which allows cert

Installing under UNIX/LINUX 60 AX3000 - User's Manual Main characteristics of a tty session: - pre-defined allocation of pseudo-terminals (pt

Installing under UNIX/LINUX AX3000 - User's Manual 61 The Axel SSH client is compliant with OpenSSH 1.5. To accept Axel SSH connections, the

Installing under UNIX/LINUX 62 AX3000 - User's Manual Note: selecting an emulation sets the value of the TERM environment variable (see Chapt

Installing under UNIX/LINUX AX3000 - User's Manual 63 - Wrap: behaviour of the AX3000 when the cursor reaches the last column of the screen:

Installing under UNIX/LINUX 64 AX3000 - User's Manual - End Sequence: to stop transparent printing mode - Init String: this character string

Installing under UNIX/LINUX AX3000 - User's Manual 65 There are three groups of programmable keys: - from F1 to F48: function keys used singl

Installing under UNIX/LINUX 66 AX3000 - User's Manual To customise the colouring mode, select the "Colouring Mode Settings" paramet

Installing under UNIX/LINUX AX3000 - User's Manual 67 b) Enhanced Colouring Mode This mode enables background colour, foreground colour and t

8.1 - RDP SCREEN SESSION...136 8.1.1 - Setting-Up an RDP Session ...

Installing under UNIX/LINUX 68 AX3000 - User's Manual To set a colouring attribute, select and press <CR>. The following dialog box app

Installing under UNIX/LINUX AX3000 - User's Manual 69 The benefit of this method is that the colouring mode is specific to a single session.

Installing under UNIX/LINUX 70 AX3000 - User's Manual These parameters are: - TERM Value (telnet and ssh protocols). The value of this envir

Installing under UNIX/LINUX AX3000 - User's Manual 71 a) Enabling a Login Script To associate a login script with a session, within the &apos

Installing under UNIX/LINUX 72 AX3000 - User's Manual 5.1.9 - The Multi-Shell The AXEL multi-shell software allows multiple telnet sessions o

Installing under UNIX/LINUX AX3000 - User's Manual 73 The main tcpmsh options are: - b: selecting generic names of pseudo-terminals: - b 0 (d

Installing under UNIX/LINUX 74 AX3000 - User's Manual If a view does not already exist, the tcpmsh program allocates a pseudo-terminal, launc

Installing under UNIX/LINUX AX3000 - User's Manual 75 5.2.1 - Setting-Up a VNC Session To set-up a VNC session, select [Configuration]-[Term

Installing under UNIX/LINUX 76 AX3000 - User's Manual a) Connection Properties Within the 'Session Profile' box, select 'Conne

Installing under UNIX/LINUX AX3000 - User's Manual 77 b) Additional Parameters Within the 'Session Profile' box, select 'Addit

c) Disconnect by the AX3000...171 8.5.4 -Turning-Off the AX3000 ...

Installing under UNIX/LINUX 78 AX3000 - User's Manual - CAPS Key Mode : set the CAPS LOCK to behave in either of three ways: - Caps Lock: eac

Installing under UNIX/LINUX AX3000 - User's Manual 79 - Mouse Sensitivity: This setting varies the sample rate of the mouse. If the sensitivi

Installing under UNIX/LINUX 80 AX3000 - User's Manual The first operation performed by axvnc is to check the system has the necessary compone

Installing under UNIX/LINUX AX3000 - User's Manual 81 logon (username + password) allows the AX3000 user to be identified and given their res

Installing under UNIX/LINUX 82 AX3000 - User's Manual The following screen allows the removal/addition of a VNC terminal with Login:

Installing under UNIX/LINUX AX3000 - User's Manual 83 The following screen allows the addition or removal of a VNC terminal without Login (th

Installing under UNIX/LINUX 84 AX3000 - User's Manual printers can be attached to the AX3000. A printer is generally controlled by a network

Installing under UNIX/LINUX AX3000 - User's Manual 85 - either a redirection to the ttyp (example: "cat file > /dev/ttyp12") - o

Installing under UNIX/LINUX 86 AX3000 - User's Manual Printers can be added using either of two methods: - Standard Processing: AIX sends a

Installing under UNIX/LINUX AX3000 - User's Manual 87 5.3.3 - The rsh Command The rsh command (or rcmd on SCO OpenServer) can be used to prin