Axel Oxygen 3 Operations Instructions Page 21

  • Download
  • Add to my manuals
  • Print
  • Page
    / 51
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 20
Oxygen 7Oxygen 7 - MONO MODULE
Pag. 21
7.10 EQUALISER
The Equaliser(EQ) comprises four sections. The upper control provides
H.F.(treble) boost and cut of +/-15dB and the lower control provides L.F.
(bass) boost and cut of +/-15dB.
The centre two knobs is arranged as MID frequency section, with a
cut/boost control (lower knob) of +/- 15dB, and a frequency control which
determines at which frequency the boost/cut action will be centered. This
MID section is particularly versatile for speech, enabling particular
characteristics of the presenter to be lifted or suppressed very precisely.
Set the cut/boost control of each section to the centre-detented position
when not required.
7.11 AUX SEND
This control sends the input channel signal to the Auxiliary bus (range -
to 0 dB max). As AUX bus is separated from the main outputs, it can
provide additional output for foldback, echo units or extra loudspeaker
feed.
AUX signal is always derived after the EQ section and may also be
selected as PRE FADER or POST FADER by pressing the associated
PRE switcher.
When PRE selection is pressed, AUX signal is unaffected by the fader
position. This makes them particularly suitable for foldback or monitor
feeds, which need to be controlled separately from the Master mix.
When PRE selection is released, AUX signal is derived after the EQ and
channel fader, and therefore follows any changes in fader level. It is
normally used to drive effects processing units which are fed back into the
mixer and which must fade out with the input channel.
The channels `START' switch will NOT switch the Auxiliary send on or off
when it is set post fader.
7.12 PAN
The PAN control determines the position of the signal within the stereo
mix image. Rotation fully anticlockwise feeds the signal solely to the Left
mix bus (Master, Sub 1 & Sub 2 outputs), while rotation clockwise sweeps
the image to the Right mix bus (Master, Sub 1 & Sub 2 outputs).
The centre applies 0dB of gain to both signals.
Page view 20
1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 50 51

Comments to this Manuals

No comments