Axel Oxygen 3 Operations Instructions download pdf (Page 37)

Oxygen 7Oxygen 7 - STEREO MODULE

Pag. 37

The PFL signal can be heard by way of external headphones and

amplifiers with loudspeaker connected to the Control Room and / or

Studio sections – please refer to § Master and Monitor module

descriptions.

The user may chose among two PFL operating modes: ADDITIVE or

SINGLE

•

In the ADDITIVE Mode, You can listen to one or more PFLs at

the same time by pressing one or more PFL keys

•

In the SINGLE Mode, only one PFL is active at once

Please refer to PFL MODE jumper on the MASTER Module.

PFL RESET key will always disable all the active PFL keys, regardless of

PFL MODE jumper.

8.17 START button

The START button is used to start and stop a remote piece of equipment,

as well as working in conjunction with the fader open signal to allow output

from the channel.

Each press of the START button will alternately send Start and Stop

signals (See Remote Interface § 7.1). The LED illuminates accordingly.

Two Start operating mode are given related to the Fader position:

When FADER ÙÙ START jumper is closed (see § 7.7 Module settings),

moving the fader away from the down position brings the module into the

ON status and a Start command is given (see Remote Interface). Moving

the fader back to its down position brings the module to OFF status and a

Stop command is given. This jumper does not affect START button

operating.

When START ÙÙ FADER jumper is closed (see § 7.7 Module settings),

Moving the fader away from the down position does NOT bring the

module into the ON (Start) status. While the fader is already away from

the down position press START button to activate the module and provide

a START command. Press START again to de-activate the module.

ON/OFF status of the module is regardless of the Fader position.

When the START button is not activated, the channel fader can be

opened without bringing the audio up and without generating a start

command. The channel can now be activated, by pressing the START

button (ON and START red LEDs will glow).

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 50 51

No comments

Axel Oxygen 3 Operations Instructions Page 37