Axel Oxygen 3 Operations Instructions download pdf (Page 39)

Oxygen 7Oxygen 7 - STEREO MODULE

Pag. 39

8.20 Detect LED

The Detect LED illuminates when a signal > - 30 dB is present on the

selected input (A or B). The control is performed PRE-FADER.

8.21 ALIGNEMENT OF INPUTS

When plugging in a new source start with the channel muted or fader

turned down and the Cue activated.

This prevents any unexpected signal in the loudspeakers. The signal is

displayed on the main CUE meter providing finer resolution and dynamic

indication.

Adjust the channel GAIN control for an average channel meter reading of

‘0’ with loud moments lighting ‘+3’.

Adjust the Gain trimmers if the signal is still too high with gain turned

down. Reduce the gain if the signal meter always ranges in the 0 ÷ + 3dB

area. It may be necessary to re-adjust the gain if changes are made to the

equaliser or inserted signal processing.

Select channel PFL to check the signal quality in the headphones while

the fader is off or the channel is muted.

8.22 TIMER

Oxygen 7 may feature, as an option, two Timers on the meterbridge. They

may be useful for timing the duration of music tracks or presenter speech.

In particular, one Timer can be factory configured so that it is controlled

(started) by the use of the faders on Stereo Modules and the second can

be factory configured so that it is controlled (started) by the use of the

faders on Mono Modules.The Timers can be also manually controlled

using the Timer Control module buttons.

Reset Reset pressed while the timer is stopped simply returns the time

display to 00:00.00. The timer can only be reset when in the Stop mode.

Hold When pressed, freezes the timer’s display (showing the present

time). The timer does not continue to run. Releasing Hold runs the time

display again.

Start/Stop Immediately starts/ stops the timer from the displayed time.

Restart When pressed, the timer automatically and immediately resets to

00:00.00 and immediately starts. The same result is achieved whenever

the fader of an Input module, with its timer function enabled, is

moved from its down (closed) position. The timer will be in any case

stopped by a manual stop (STOP button on the Timer frame).

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 50 51

No comments

Axel Oxygen 3 Operations Instructions Page 39