Axel Oxygen 3 Operations Instructions Page 49

  • Download
  • Add to my manuals
  • Print
  • Page
    / 51
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 48
Oxygen 7Oxygen 7 - TELCO MODULE
Pag. 49
to Mono module (and routed as TB to Studio see § 7.7).
When the PFL button is deactivated:
the Master, Sub1 or Sub2 buses are automatically sent to the
caller, depending on the Telco routing switches configuration
the caller is broadcast with channel fader opened
The PFL function can be cancelled:
by using the PFL RESET button on the MASTER Module
by activating PFL on another module (if PFL MODE Jumper on
the Master module is open see Master module Jumper
settings)
by pressing the PFL button again
The PFL signal can be heard by way of external headphones and
amplifiers with loudspeaker connected to the Control Room and / or
Studio sections please refer to § Master and Monitor module
descriptions.
The user may chose among two PFL operating modes: ADDITIVE or
SINGLE
In the ADDITIVE Mode, You can listen to one or more PFLs at the
same time by pressing one or more PFL keys.
In the SINGLE Mode, only one PFL is active at once.
Please refer to PFL MODE jumper on the MASTER Module.
PFL RESET key will always disable all the active PFL keys, regardless of
PFL MODE jumper.
9.15 HOOK button
The Hook switch remotely controls the Line hooking on suitable telephone
hybrids (such as Macrotel 5,7,9 and BoxTel by Axel Technology). This
switch connects / disconnects the hybrid from the telephone line.
Ring led blinks when a call (ring) is coming. This requires a suitable
control by the external telephone hybrid (such as Macrotel 5,7,9 and
BoxTel by Axel Technology). Please refer to Telco Remote Interface - §
Errore. L'origine riferimento non è stata trovata.
If the HOOK switch is pressed with an external hybrid properly connected,
the red Hook led will illuminate and the caller is connected to the Telco
module but not yet heard in the broadcast because the fader is still down.
By opening the fader, the Telco module will be activated and the signal
will enter the program (see also MASTER/SUB switches and PFL
PRIVATE button)
Page view 48
1 2 ... 44 45 46 47 48 49 50 51

Comments to this Manuals

No comments