Axel Oxygen 3 Operations Instructions download pdf (Page 51)

Oxygen 7Oxygen 7 - TELCO MODULE

Pag. 51

9.18 Detect LED

The Detect LED illuminates when a signal > - 30 dB is present on the

selected input (A or B). The control is performed PRE-FADER.

9.19 ALIGNEMENT OF INPUTS

When plugging in a new source start with the channel muted or fader

turned down and the Cue activated.

This prevents any unexpected signal in the loudspeakers. The signal is

displayed on the main CUE meter providing finer resolution and dynamic

indication.

Adjust the channel GAIN control for an average channel meter reading of

‘0’ with loud moments lighting ‘+3’.

Adjust the Gain trimmers if the signal is still too high with gain turned

down. Reduce the gain if the signal meter always ranges in the 0 ÷ + 3dB

area. It may be necessary to re-adjust the gain if changes are made to the

equaliser or inserted signal processing.

Select channel PFL to check the signal quality in the headphones while

the fader is off or the channel is muted.

1 2 ... 46 47 48 49 50 51

No comments

Axel Oxygen 3 Operations Instructions Page 51