Axel Oxygen 3 Operations Instructions Page 23

  • Download
  • Add to my manuals
  • Print
  • Page
    / 51
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 22
Oxygen 7Oxygen 7 - MONO MODULE
Pag. 23
To make it active the On status must be engaged (see § 7.16). The LED
will illuminate at full brightness to indicate that the circuit is now active.
When the switch is depressed, LED is off and the circuit is never active,
regardless of the module status (On/Off).
LED OFF
switch depressed / the status of the module
doesn’t affect routing circuit
LED ON
switch pressed / DUCK circuit is active as the
module is On
LED HALF
BRIGH.
switch pressed / DUCK circuit is non active as the
module is Off
This three mode operating has been introduced in order to prevent buss
from additional noise when switch is pressed and module is off.
7.15 PFL button
Stereo pre-fade listening. PFL button (operated only in latched) mode
allows pre-fade listening (post pan-pot) of the channel with the fader
closed.
When the PFL button is activated, the channel signal will be connected to
the PFL output and to the CUE single-meter circuitry.
Even when the channel is active, the PFL system is active.
The PFL function can be cancelled:
by using the PFL RESET button on the MASTER Module
by activating PFL on another module (if PFL MODE Jumper on
the Master module is open see Master module Jumper
settings)
by pressing the PFL button again
The PFL signal can be heard by way of external headphones and
amplifiers with loudspeaker connected to the Control Room and / or
Studio sections please refer to § Master and Monitor module
descriptions.
The user may chose among two PFL operating modes: ADDITIVE or
SINGLE
In the ADDITIVE Mode, You can listen to one or more PFLs at
the same time by pressing one or more PFL keys
In the SINGLE Mode, only one PFL is active at once
Please refer to PFL MODE jumper on the MASTER Module.
PFL RESET key will always disable all the active PFL keys, regardless of
PFL MODE jumper.
Page view 22
1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 50 51

Comments to this Manuals

No comments