Axel Oxygen 3 Operations Instructions download pdf (Page 34)

Oxygen 7Oxygen 7 - STEREO MODULE

Pag. 34

8.10 MODE switches

With both left and right switches activated, the stereo signal will be mixed

to mono on both outputs.

With only Mono L. activated, the left signal will be sent to both left and

right signal paths.

With only Mono R. activated, the right signal will be sent both left and

right signal paths.

In the 'Stereo' mode, neither Mono L. or Mono R. switches need to be

activated.

8.11 EQUALISER

The Equaliser(EQ) comprises three sections. The upper control provides

H.F.(treble) boost and cut of +/-15dB and the lower control provides L.F.

(bass) boost and cut of +/-15dB.

The centre knob is arranged as MID frequency section, with a cut/boost

control (lower knob) of +/- 15dB.

Set the cut/boost control of each section to the centre-detented position

when not required.

8.12 AUX SEND

This control sends the input channel signal to the Auxiliary bus (range -∞

to 0 dB max). As AUX bus is separated from the main outputs, it can

provide additional output for foldback, echo units or extra loudspeaker

feed.

AUX signal is always derived after the EQ section and may also be

selected as PRE FADER or POST FADER by pressing the associated

PRE switcher.

When PRE selection is pressed, AUX signal is unaffected by the fader

position. This makes them particularly suitable for foldback or monitor

feeds, which need to be controlled separately from the Master mix.

When PRE selection is released, AUX signal is derived after the EQ and

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 50 51

No comments

Axel Oxygen 3 Operations Instructions Page 34